Bauknecht ESIS 8641 NE Instrucciones de uso descargar pdf (Pagina 5)

CONTROL PANEL

DAILY USE

SWITCHING THE HOB ON/OFF

To switch the hob on, touch the control until the cooking zone

displays light up.

To switch o, touch the same control until the displays switch o. All the

cooking zones are deactivated.

If within 10 seconds of switching on, no function is selected, the hob

switches o automatically.

SWITCHING ON AND ADJUSTING COOKING ZONES

Place the pot on the desired cooking zone and switch on the cooking

top. Activate the selected cooking zone by touching the corresponding

“Zone selection control”. “5” will appear on the display. Slide the nger

over the “Power setting control” to select the required power level, from

min. 0 to max. 9. To conrm the selection wait 10 seconds or touch again

the same “Zone selection control”.

DEACTIVATION OF COOKING ZONES

To switch o the cooking zone, select the level “0” with the “Power

setting control”.

The cooking zone switches o and, if still hot, the letter “H” appears on

the zone display.

CONTROL PANEL LOCK

This function locks the controls to prevent accidental activation of the hob.

To activate the control panel lock, touch control; an acoustic signal

sounds and a luminous indicator appears on the display. The control

panel is locked except for the switching o function.

To deactivate the control panel lock, repeat the activation procedure.

The presence of water, liquid spilled from pots or any objects resting on

the controls can accidentally activate or deactivate the control panel lock.

Power indicator display

Selected cooking zone indication

(the dot blinks when there is a Timer active on that zone

)

TIMER

The timer can be used to set the cooking time for a maximum of 99

minutes (1 hour and 39 minutes) for all the cooking zones.

Select the cooking zone to be used, touch the timer “–” or “+” controls

and a beep signals the function. The display shows “00”. The Timer value

can be decreased and increased by keeping the nger on the controls

“+” or “–”. After the Timer value selection, the display continue to blink

for 10 seconds before the countdown starts.

When the set time has elapsed, an acoustic signal sounds and the

cooking zone switches o automatically.

To deactivate the timer, select the cooking zone, touch the Timer

controls “–” and “+” simultaneously.

IMPORTANT:

• The dot blinking next to the power level display shows that the

Timer function is active on that zone.

• In case of more than one timer active, display shows the timer with

the shorter duration and corresponding indicator blinks.

RESIDUAL HEAT INDICATOR

If the display shows

the cooking zone is still hot. If the residual

heat indicator of a given cooking zone is lit, that zone can be used, for

example, to keep a dish warm or to melt butter.

When the cooking zone cools down, the display goes o.

IMPORTANT: To avoid a permanent damage the hob:

• do not use pots with bottoms that are not at;

• do not use metal pots with enamelled bottom;

• do not place hot pots/pans over the control panel.

FIRST TIME USE

After connecting the hob to the electrical power supply, the control panel

is locked. To unlock the control panel, touch the control for 2 seconds.

The control panel lock indicator switches o and the hob can be used.

Read the “Control panel lock” paragraph for more details.

Timer controls

and display

Zone selection controls and display

On/Off

Melting

Boiling

Control

panel lock

Dual/Triple zone

Power setting control

1 2 3 4 5 6 7

Comentarios a estos manuales

Sin comentarios

Bauknecht ESIS 8641 NE Instrucciones de uso Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Bauknecht ESIS 8641 NE